Rough Sawn Treated Pine
Gippsland Treated Pine Rough Sawn & Dressed Treated Pine
As the name suggests rough sawn timber has a rough surface as it has not been dressed after sawing.
Rough sawn timber is very versatile and can be used for building, fencing, outdoor areas and much more.
We can supply the following sizes either treated with CCA or ACQ preservative.
We can also treat timber to a higher Hazard Level if required above the standard H3 or H4.
All sizes can be dressed on up to four sides at additional cost, usually 30% extra.
Standard Sizes available:
Wet rough sawn CCA and ACQ (treated to order) treated, H3 suitable for all internal and exterior above ground use.
| mm | Inches |
|---|---|
| 50 x 25 | 2 x 1 |
| 75 x 25 | 3 x 1 |
| 100 x 25 | 4 x 1 |
| 150 x 25 | 6 x 1 |
| 200 x 25 | 8 x 1 |
| mm | Inches |
|---|---|
| 75 x 38 | 3 x 1.5 |
| 100 x 38 | 4 x 1.5 |
| 150 x 38 | 6 x 1.5 |
| 200 x 38 | 8 x 1.5 |
| mm | Inches |
|---|---|
| 75 x 50 | 3 x 2 |
| 100 x 50 | 4 x 2 |
| 150 x 50 | 6 x 2 |
| 200 x 50 | 8 x 2 |
| 250 x 50 | 10 x 2 |
| 300 x 50 | 12 x 2 |
The following sizes treated to H4 hazard level as standard. H4 is suitable for in-ground use.
| mm | Inches |
|---|---|
| 100 x 75 | 4 x 3 |
| 125 x 75 | 5 x 3 |
| 100 x 100 | 4 x 4 |
| 125 x 125 | 5 x 5 |
Standard lengths for the above sizes include: 6.0, 5.4, 4.8, 4.2 & 3.6m.
Not all sizes of timber come in all standard lengths.
Contact Gippsland Treated Pine
for all your Rough Sawn Treated Pine needs